1 / 4
Project Box for Boards Similar to Arduino UNO R4 Minima — zdjęcie 1
1 / 4

Project Box for Boards Similar to Arduino UNO R4 Minima

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D Printed Project Box designed to fit boards similar to the Arduino UNO R4 Minima.

Ocena
5 / 5
Polubienia
13
Pobrania
153
Wydruki
1
Wyświetlenia
658
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

3D Printed Project Box designed to fit boards similar to the Arduino UNO R4 Minima.

The lid is secured with a snap-fit design.

There is a 1mm gap between the PCB and the inner wall.

Screws are used for securing the Arduino board to the base – direct thread engagement, no brass inserts required.
Screw specifications: 4x DIN912 304 A2 M2.5 4mm.

Both the lid and base have ventilation holes. Ventilation holes in the lid provide clear visibility of the board's LEDs.
 

 

 

Tagi