4in Duct Slider Cut and Screw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Duct slider for 4in flex hose. Designed to be installed on a thin shell of a 3D printer enclosure.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 379
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Prints as 5 objects. Intended to assemble utilizing M3 and M4 screws with heat-set inserts. The slider door utilizes (optional) magnets to retain open and closed positions.
!!! You will need to cut into your enclosure/tent to install !!!
Please, please, be cautious when doing so! Test fit everything before. Ensure your screws, magnets, and hose all work well with this before cutting into your enclosure.
This is part of my series I'm calling “Things I designed to fit my hyper-specific ducting needs that might work for someone else” Feel free to use it outright, as inspiration, or manipulate the attached Inventor file anyway you see fit.