Simjack UT -> Heusinkveld Ultimate+ Upgrade Kit parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parts necessary to install the Heusinkveld Ultimate+ Upgrade Kit onto your Simjack UT pedals.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 1395
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Printed with PLA. Use supports on the Spring Adapter stl.
I recently upgraded my Simjack UT pedals using the Heusinkveld Ultimate+ Upgrade Kit ordered from Trakracer in Canada. After placing my order, I realized additional hardware was needed to complete the upgrade properly, including a specific spring and spacers. Since these aren't typically included when buying through resellers, I sourced alternative parts from Aliexpress that worked perfectly.
Here's a concise breakdown of everything you’ll need beyond the standard Heusinkveld upgrade kit:
1. Bronze Bushings (10x12x20 mm)
Note: Slight sanding was required as these were slightly thicker than the pivot’s original tolerance.
2. Stainless Steel Hex Standoff Pillar Stud (M8x10mm)
3. Alloy Steel Compression Springs (OD 30mm x Length 20mm)
I purchased three types: yellow (softest), blue (medium), and red (firmest). Personally, the yellow spring provided the best balance and most comfortable pedal feel. Blue was moderately stiff, and red was extremely firm.
After completing this upgrade, I noticed an improvement in pedal feel, particularly in trail braking. The softer spring (compared to the original firm elastomers) allowed more precise control at lower brake pressures.
I calibrated my setup using Heusinkveld’s software for 55kg brake force. Your experience may vary depending on your personal preference for pedal stiffness and brake force.
Overall, sourcing these extra components along with the 3D printed adapters makes the Heusinkveld upgrade fully compatible and significantly enhances the Simjack UT pedal experience.