1 / 1
Simjack UT -> Heusinkveld Ultimate+ Upgrade Kit parts — image 1

Simjack UT -> Heusinkveld Ultimate+ Upgrade Kit parts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Parts necessary to install the Heusinkveld Ultimate+ Upgrade Kit onto your Simjack UT pedals.

Rating
0 / 5
Likes
8
Downloads
69
Makes
0
Views
1,395
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

Printed with PLA. Use supports on the Spring Adapter stl. 


I recently upgraded my Simjack UT pedals using the Heusinkveld Ultimate+ Upgrade Kit ordered from Trakracer in Canada. After placing my order, I realized additional hardware was needed to complete the upgrade properly, including a specific spring and spacers. Since these aren't typically included when buying through resellers, I sourced alternative parts from Aliexpress that worked perfectly.

Here's a concise breakdown of everything you’ll need beyond the standard Heusinkveld upgrade kit:

1. Bronze Bushings (10x12x20 mm)

Link to Aliexpress

Note: Slight sanding was required as these were slightly thicker than the pivot’s original tolerance.

2. Stainless Steel Hex Standoff Pillar Stud (M8x10mm)

Link to Aliexpress

3. Alloy Steel Compression Springs (OD 30mm x Length 20mm)

Link to Aliexpress

I purchased three types: yellow (softest), blue (medium), and red (firmest). Personally, the yellow spring provided the best balance and most comfortable pedal feel. Blue was moderately stiff, and red was extremely firm.

After completing this upgrade, I noticed an improvement in pedal feel, particularly in trail braking. The softer spring (compared to the original firm elastomers) allowed more precise control at lower brake pressures.

I calibrated my setup using Heusinkveld’s software for 55kg brake force. Your experience may vary depending on your personal preference for pedal stiffness and brake force.

Overall, sourcing these extra components along with the 3D printed adapters makes the Heusinkveld upgrade fully compatible and significantly enhances the Simjack UT pedal experience.