ANT-L1GNSS Mounting Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting plate for ANT-L1GNSS Antenna.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Share Alike
This is a simple mounting plate for the EOS Positioning Systems ANT-L1GNSS Antenna. It is similar to the mount sold by EOS (ANT-SAMP). It is designed to be wider than the unit to protect it if it tips over.
Like the EOS model it mounts with four 6-XX x 0.5" screws. The ones I used were button head style.
Unlike the EOS model I've designed it for use with a ¼-20 UNC heat set insert. It can be used with a cheap telescoping monopod.
I printed it with 40% infill, 4 walls, 5 top and bottom layers. It was probably overkill but its solid. I printed mine in ASA since it will be used outside and will more than likely end up sitting in the hot truck at some point in its existence. Use your best judgement on settings and material.
I've included an STL, STEP, and the FreeCAD FCStd file. The CAD is a mess, not sure why I included it. Lol.