1 / 7
K8200/3Drag GT2 Y Belt Mount with easy Tension - Upgrade — zdjęcie 1
1 / 7

K8200/3Drag GT2 Y Belt Mount with easy Tension - Upgrade

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This simple construction are for upgrading your K8200/3Drag to GT2 belt on Y axis. It is a direct replacement, reusing…

Ocena
0 / 5
Polubienia
12
Pobrania
118
Wydruki
0
Wyświetlenia
774
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This simple construction are for upgrading your K8200/3Drag to GT2 belt on Y axis.
It is a direct replacement, reusing the original mount screw and holes, adding the missing belt tension.

For complete upgrade of Y axis to GT2, you need:

  • GT2 6mm belt (mine is from ebay)
  • GT2 pulley for motor (20 teeth and 5mm motor hole)
  • The printed parts (2x wedge + mount + clamp)
  • Two M3x30mm screws

Two M3 nuts Assembly as shown on pictures.

For the X axis use K8200/3Drag GT2 X Belt Mount with easy Tension - Upgrade

Updated: Included STEP files for use in CAD programs.

Category: 3D Printer Parts

Tagi