Pegboard Speaker Shelf for 1" pegboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Speaker shelf for Bose SoundLink Mini speaker.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 344
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Pegboard speaker shelf designed for Bose SoundLink Mini speaker.
The shelf has a 1.25mm recess sized to fit the rubber pad on the bottom of the SoundLink to help keep the speaker from accidentally getting knocked off the shelf.
The shelf is deep enough that the rear speaker/port has space from the wall.
Will also fit any compact Bluetooth speaker that will fit on a 178mm x 76mm (approx 6.75" x 3") shelf.
This shelf is designed for US/imperial pegboard with holes 1" on center. I don't know if it is compatible with metric pegboard.
I printed with PETG and 4 external perimeters to make the shelf and, especially, the pegs sturdier.
Used the following settings to make the supports easier to remove-
- 0.275mm z distance
- 75% xy distance
- 3mm support spacing
- 4 interface layers
- 0.2mm interface layer spacing