Two-stage model rocket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small two-stage model rocket I designed for a 3D printed rocketry competition.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 57
- Wydruki
- 1
- Wyświetlenia
- 256
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- GNU General Public License v3.0
This is a small two-stage rocket designed to fly C Motors. The upper stage is designed to recover utilizing a streamer rather than a parachute due to size constraints; however, if you know that you will be landing on a hard surface, please utilize a small parachute rather than a streamer. The first stage is designed to recover using tumble recovery, which is why the fins are larger.
To actually set up this rocket to fly, please tape together the two motors you want to stage with basic clear office tape. Warning this model has tight tolerances and was designed to be printed with carbon fiber pla.