Version 2 - animatronic T-800 Terminator skull with face tracking
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my Version 2 animatronic T-800 Terminator skull. With the included instructions, you can build one too!
- Ocena
- 5 / 5
- Polubienia
- 232
- Wydruki
- 6
- Wyświetlenia
- 7953
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Standard Digital File License
Key Improvements from Version 1:
Assembly with fasteners – No more glue required.
Redesigned head tilting mechanism – A single large servo in the head replaces two servos in the base, reducing the total servo count.
Improved teeth design – Newly remodeled, separate teeth for a more realistic look.
New base design – Enhanced stability and aesthetics.
Almost every part has been improved or adjusted, making V1 and V2 incompatible with each other.
You can build the skull in two configurations:
Face-tracking version – Requires a Raspberry Pi.
Basic version – Moves the head randomly without face tracking.
For full instructions, check them out here:
The Raspberry Pi image link is in the RaspberryPi_Image_Link.txt file.
If you’re interested in my T‑800 Skull Version 3 or have trouble with this built, feel free to join the Discord to stay up to date with the project.
If you have any questions, feel free to ask. Enjoy your build!
LayerLux3D
--------------------------------
05.04.2025 added T800_V2_instructions_1_1.pdf
30.05.2025 If you have a printer with a 220x220 mm build volume, I have added the file A_01_base_220_220.stl. The original model was slightly too large, so I adjusted the back slightly to make it fit