Harken Carbo Block Line Guards
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a repost of the harken block guards https://harkenblockheads.com/feed/line-guards/
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 257
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Harken design of carbo block line guards. full and half guards for 56 and 75mm carbo blocks.
Instructions link: https://harkenblockheads.com/feed/wp-content/uploads/2022/09/Carbo-Line-Guard-Instructions.pdf
Line Guard Types
- The half line guards are smaller and more accommodating for a wider angle of trim, while the full line guards are larger and better for blocks with fewer changes in trimming angle.
Material
- At Harken we have used a type of plastic called “PLA Tough” to print sample guards, which is more of a structural material as opposed to a cosmetic material. - Using PLA Tough is not necessary. We use black. You can use any material and color you can access. Experiment!
Printing Details
- When we printed carbo line guards it generally took about 6 hours to print one half guard and about 12 hours to print one full guard. - We have primarily printed Carbo line guards using a mid-level printing resolution. - We used the Ultimaker S5 3D printer, but many other brands and levels of 3D printers should work well. - Some 3D printers use structural material like PVA to help print objects, but using structural material is not necessary. You can see that we used this type of material in the light blue parts of the above images. This structure material can be removed by dissolving it in a soluble substance or by using wire snippers, your hands, or other tools.