MK23 Silencer adapter insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This insert was created as an adapter and first chamber for the typical 29 mm threaded silencers.
It has the MK23 16x1 mm CW thread and it will fit the MK23 outer barrel
There are 3 variations, you can chose what's working for you, they have different sound dumping effect.
It will take about half of the silencer in length, the rest is recommended to be filled with sound absorbing foam rings.
Vertically without support
At least 3 walls, and 50% infill, with high 0.1-0.15 layer height.
Some materials have different shrinkage factor, and and printers have different flow settings, please make sure that your printer is set up correctly, or rework the inner thread afterwards.