MK23 Silencer adapter insert
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This insert was created as an adapter and first chamber for the typical 29 mm threaded silencers.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 76
- Makes
- 0
- Views
- 441
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
This insert was created as an adapter and first chamber for the typical 29 mm threaded silencers.
It has the MK23 16x1 mm CW thread and it will fit the MK23 outer barrel
There are 3 variations, you can chose what's working for you, they have different sound dumping effect.
It will take about half of the silencer in length, the rest is recommended to be filled with sound absorbing foam rings.
Vertically without support
At least 3 walls, and 50% infill, with high 0.1-0.15 layer height.
Some materials have different shrinkage factor, and and printers have different flow settings, please make sure that your printer is set up correctly, or rework the inner thread afterwards.