1 / 1
20mm trailer rubber washer (suits Ifor Williams and others) — zdjęcie 1

20mm trailer rubber washer (suits Ifor Williams and others)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement washer to fit the rear of trailers (including Ifor and others) to avoid bouncing/banging noises.

Ocena
0 / 5
Polubienia
0
Pobrania
14
Wydruki
0
Wyświetlenia
71
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

Many UK trailers have ~20mm pins to secure sides/tailgates.  The washers perish or vanish over time.  This is a replacement washer.

Print in TPU.  Affix vertically.  Thickness is 4.5mm, scale if necessary in the slicer.

To keep it uniformly squishy reduce/remove the perimeter layers in the slicer.  Top/bottom layers are OK.

Diameter of hole is 20.0mm, to suit typical 20mm/19mm/3/4" pins on UK trailers.

Tagi