1 / 1
20mm trailer rubber washer (suits Ifor Williams and others)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement washer to fit the rear of trailers (including Ifor and others) to avoid bouncing/banging noises.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Many UK trailers have ~20mm pins to secure sides/tailgates. The washers perish or vanish over time. This is a replacement washer.
Print in TPU. Affix vertically. Thickness is 4.5mm, scale if necessary in the slicer.
To keep it uniformly squishy reduce/remove the perimeter layers in the slicer. Top/bottom layers are OK.
Diameter of hole is 20.0mm, to suit typical 20mm/19mm/3/4" pins on UK trailers.