RC Plane Landing Gear Door Hinges
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are the hingest for the doors that open and close to allow the wheel and strut to come out on an RC plane
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 181
- Wydruki
- 0
- Wyświetlenia
- 408
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
My friend had some of these in metal and asked if I could remake in plastic. I did, and tried PLA, FLEX, PC, and PETG. The PC he said worked the best by far. I guess that's no surprise.
The design he sent in metal had no reinforcement between the tab and the arm, since the metal is plenty strong enough. I cracked several trying to get them off the print plate, so I decided to make some that were “reinforced”. Basically I added a big glob of plastic at the bent. They look far more ugly, but they're far stronger, and I assumed no one would see them as they're inside the plane.
I included gcode for the various styles. Message me if you want the fusion files.