TL-W5MC1 Queen Bee Pro mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to upgrade from switches to induction endstops for the Queen Bee Pro CNC. I needed mounting brackets.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Queen Bee Pro from Bulkman3d comes with mechanical endstop limit switches. While ok, they're not fantastic, and I wanted something a bit longer-lasting.
I designed these two (three if you count the mirrored Y axis as an extra version) mounts to be able to mount TL-W5MC1 induction endstops instead.
The bracket for X can also be used for the Z axis, though I still need to validate the detection distance at 24V on the probes I have. I included the STEP and FreeCAD source files for reference, and to adjust dimensions if you need to adjust the offset to allow your probes to trigger on the metal plates coming close.
These were designed in AstoCAD, though the file format is compatible with FreeCAD 1.0.
You will need extra M5 T-Nuts and M5x8 screws to mount them all if you're dependent on the original Bulkman kit.