Liczymy pasujące modele…
This project can be used as help material to make more easier to learn how electromagnetic induction works. I appreciate the feedback! Layer height: 0.2 Infill density: 30%
Ce support de vide-poche est spécialement conçu pour s'adapter parfaitement à la Volkswagen Golf 8, au-dessus de la zone de recharge à induction. Il permet de ranger facilement vos petits objets du quotidien, tels que clés, porte-monnaie,…
A simple box for a DIY Dynavap induction heater. Designed to accommodate a PWM module for adjustable duty cycle (must be used with a MOSFET). Recommend printing in PETG for better tolerance of heat, but I used PLA and haven't had any…
this induction hotplate support is create for help blind people for know where place her pan on the good emplacement Is difficult to see were place the pan on the hotplate because they dont have a delimitation and if your blind you dont…
Although the original designs are great, after / during the build of my annealer, i found that some of the parts did not quite fit together right or the tolerance were too tight. I also designed some new parts that help out with the…
Hope this version doesnt brake, not yet tested, the old version is weaker but included
support de téléphone avec un trou au milieu pour y insérer une charge a induction
Induction coil washer for PCB mounting It isolates the induction coil from the conductor tracks running on the implantation side of the multilayer PCB. Attached is the parameterizable Fusion 360 file.
Modifiable model available at https://cad.onshape.com/documents/212e678b5c2965dabe91e87b/w/f469ebc338bf2983ff486fe2/e/15ac8b30fbb13f2e8e9e9dbb
I made an induction probe mount for the Apogee toolhead and noticed that i would be able to use more of the print space if the probe was mounted on the left side. I then decided to combine the probe mount with the wire cover.
Il suffit d'imprimer les 2 parties et d'avoir le chargeur à induction “Xqisit Wireless Fast Charger 15W” qui passe dedans. Puis de coller la plaque au support.
Induction Annealer Design to make an induction annealer. Project goals: Relatively affordable Off the shelf components Simple electronic wiring Extremely consistent annealing Easily adjustable dropper Accommodates different cases…
Remix of Myco Dogs model. I changed it up a bit to better suit what I wanted. Parts and affiliate links can be found on the original model. Print with both flat sides down with no supports. I used 15% infill with PLA+, but any filament…
Phone holder and samsung induction charger mountable with apple watch holder
The Induction Coil Heater module is a really useful in mycology and laboratory environment for sterilizing needles. I have added a 40mm fan for better cooling the module.
I replaced the print head on the T500 with a custom setup so that I could have a better hot end and extruder. I didn't like where the induction probe was sitting in the new setup and I wanted to be able to adjust it so that it was exactly…
Its an induction charger for my old phone (Samsung galxy s23). I ripped the electronics out off an old smartwatch charger and made a case for it. I don't know where to get that stuff. Own research and probably modification of the modell…
Modified fan nozzle holder with an induction sensor section, fits an induction sensor of 17.5mm diameter. Print Settings Printer: Prusa Rafts: No Supports: No Resolution: .2-.3 Infill: 100 Category: 3D Printer Accessories
At long last, the electric toothbrush has a functional, aesthetic and permanent place in the bathroom- and it's not the sink countertop! The induction charging base, which used to only appear during weekly recharging, nests perfectly in…
Ever camped at an angle and tried to make pancakes on an induction stove? It sucks! This can help. So print two. Each wedge is graduated in 2mm increments going from 2 to 20mm. I printed mine out of TPU because it is red.
Basket support / holder for the Bialetti Moka Induction 2 cups. No more tipping of the basket while loading it. I have added three foam strips to prevent the basket from spinning while I rotate the flattener funnel which you can also…
Designed from scratch but based on the idea from Klenmd (Thingiverse) to be adjusted to the Bialetti moka induction 2 pot. You can use it as a funnel and coffee flattener. The diameter of the basket where it is attached is 52mm. You might…
ATX mounting plate for the MGNZ control board. Mounted with standard PC screws and studs, it allows for a clean installation in an ATX case with cable routing through the rear of the motherboard support.
Important: I designed this model exclusively for the Cooler Master: FreeForm Playground contest . Since I don’t own this PC case, I wasn’t able to verify whether the mount fits correctly on the front panel. Likewise, as my phone doesn’t…
Sick of having cables in your bed while sleeping? You wake up and constantly unplug your phone checking for the time? This mobile stand/ hanger for you bed quickcharges your phone when youre asleep. No cables, no searching for the plug in…
Time to turn up the heat — pretend heat, of course! This 3D‑printed mini induction cooktop transforms any kids’ play kitchen into a serious culinary lab for tiny master chefs. Sized at 250 mm × 150 mm, it fits most standard toy kitchen…
iPhone XR Wireless Induction Charger Cradle It uses the Yootech Wireless Charger [ https://www.amazon.com/Wireless-Qi-Certified-Charging-Compatible-Qi-Enabled/dp/B079KZ49PJ/ ] and provides a cradle to keep your iPhone from wandering off…
Jednoduchý držiak na indukčnú sondu o priemere 12 mm. Simple Z-probe induction holder 12 mm. If you like this model, give it a thumbs up :)
iPhone XS Max Wireless Induction Charger Cradle It uses the Yootech Wireless Charger [ https://www.amazon.com/Wireless-Qi-Certified-Charging-Compatible-Qi-Enabled/dp/B079KZ49PJ/ ] and provides a cradle to keep your iPhone from wandering…
This is a phone holder designed to fit in the center console slot of a Pontiac Fiero and hold a 3.1"x6.2" (79x157mm) induction charger. The specific charger used was a LOOSAN pad type charger my buddy sourced, though I've included both an…
Printed with Elegoo Centauri carbon using SUNLU HS PETG. NO SUPPORT NEEDED! Just print it upside down!
Materials: PETG or something that withstands high temperatures. Don't use PLA. So the reason I made this is that most build-in induction hobs are far cheaper and come with better features than the free-standing ones usually do. Also you…
Slip fit over the coffee pot to reduce spillage when filling. Fits inside the pot when not in use. Freecad model is also included in case you wish to resize it to fit your own pot.
This case was made for this module: ZVS Induction Heating Board 120W: https://s.click.aliexpress.com/e/_c3wx3437 I recommend you to use high temperature resistant plastics like ABS because this module gets quit hot.
I make robots for Marginally Clever . Your support lets me take the risks so you don't have to. In theory, the 3d printer can probe the print bed and get a perfect first layer without the user having to endlessly recalibrate. In a…
This is an induction probe mount for auto bed leveling for the MPCNC and Mk8 extruder. It is the original MK8 extruder mount, unchanged except for the addition of the mounting tab. This is the probe I used, purchased from Amazon .…
This is my Desktop Induction heater! This device uses the following components Induction Heater Module - https://www.amazon.com/gp/product/B01GDVVANA Small Glass Slide - https://www.amazon.com/gp/product/B0049B3YXQ 400w MOSFET -…
I'm a lefty so if it looks backwards, thats why. This is the culmination of countless hours modeling, printing, modifying, redoing everything, and probably even a few tears. You'll need a 3d printer or access to one, a soldering iron and…
This is a different version that I designed to hold 3 vapcaps, and also change up the layout, and the amount of components. Change log: First, I got rid of the power indicator. The momentary button switch I currently use has a light on it…
I wanted an induction heater for my hobby knife, and vaporizer. I used the available CAD files from pelican to make an insert that is nearly seamless with the body. I also used a silver/grey case and filament that were nearly identical.…
Modeling feet to properly wedge and emboss the protections of my induction plate.
This is a box for an induction heater that I made. You will need: 4 x M3x10mm Head Socket Bolt (10 mm including the head) 4 x M3 Heat inserts (and something to insert them with like a soldering iron) 1 x 18mm→14mm Glass Water Pipe Adaptor…
A stand for storing the Duxtop 8100MC induction burner upright. Created to save some pantry space.f
Working from home can be quite demanding and juggling your smart phone should not be part of the stress-mix. I made this because I hated having to plug in the charger when the phone life was low and then de-plug that to plug in my…
I lost my original measuring cup fro Xiaomi Rice Cooker one so I made a copy using my firend's PETG - recommended - due to food contact Feel free to modify and share - skechup file included
Držák pro indukční snímače / Holder for induction sensors. : -6,5mm -8mm -12mm -PETG
This activated carbon filter absorbs the odors emitted by the resin during printing. It can be installed in your printer without the need for modification. In addition, it operates on electrical induction, so you can forget about spending…
This sensor enclosure has a M8 thread for induction sensor, M10x1 for bowden coupler. Entire thing is mounted with two M4 bolts. I used a metal ball from spray paint can, but any other <7mm ball should be fine. Triggering point of the…
This is a simple borescope and induction probe mount fo the Ender 3. It required cutting a piece out of the hotend cover. See it in action here: https://www.youtube.com/watch?v=feqLumQ4LtU Print instructions Printer Brand: Creality…
This bracket gets mounted directly beneath the effector to hold on to the E3D v6 hotend. The bracket is inteded for mounting of an inductive bed level probe. It prints best 180° flipped because of the nut holes which would need bridging…
This model is meant to be used with big phones and a palet (~108mm diam, ~7mm thick) induction charger. Tested configuration is : Iphone 13 Pro essentiel b induction charger black 8005893
This is a velocity stack made to fit 45mm wide Borla Induction Series 2000 throttle bodies. Pictured are a set of 4 installed in my Mazda MX-5. The model is 60mm tall. With enough requests I could create different sizes as well. I printed…
I accidentally destroyed the enclosure for my Apollo 2 induction heater, so I made a new one. Recommend using a material with a higher glass-transition temperature to resist marks from your DynaVap's cap.
This is a guide for making the induction coil for the MGZN Makes Case Annealer as described here . By rotating a 3mm diameter copper pipe around the notches in the guide, one can create a coil with 7.5 turns with an air gap in between.
This is for one of the extremely cheap (about $10 per) Induction Sterilizers that you can get from Amazon or other places. The 12V one isn't the fastest in the world, but should do “ok” on 18g needles and scalpels if you are trying to do…
Original Powerflex phone holder is unusable for holding phones in thick cases like mine. This modification uses back of original Powerflex holder (Opel part nr 13471402) and adds new front. Front printed from PETG. Front consist of two…
work in progress, however I've built two of these, the pictures are of mine and I tweaked it a bit too the second one for a friend, unfortunately I didn't take any pictures of that one so the STLs are off the slightly improved version I…
An enclosure for a 1000W induction heater that is used to disinfect scalpels. Made to fit with this induction heating module: https://s.click.aliexpress.com/e/_DlqpYHD Including one hole on the top for the momentary push button, and a…
The stand is compatible with induction chargers with a diameter of 76 mm and a thickness of 7 mm. The "normal" version can hold an iPhone XS with a slim case, for example, and the wide version fits an iPhone 14/15 pro in a slim case, for…
Support pour chargeur induction de Galaxy Watch 6 et pour chargeur MagSafe de la marque Force Power.
Just print… recommended white or transparent PETG After printing assembly together and if required, glue it together.
My dog destroyed the inductive charging cover for my charger for my Philips Sonicare toothbrush. Made a replacement
Print flat sides down no supports. To use, plug into 12v 10amp power supply. Insert tool into coil and hold down the button until it glows, this usually takes a few seconds. Assembly instructions: Insert both the button and the power…
Lost a rubber feet on my induction cooktop. My model is the Duxtop 9100MC/BT-M20B. Plugs right into the hole. No glue needed. This a super simple model, but I figured I'd save someone else the trouble of getting the calipers out. :) I…
Support conçu pour le chargeur à induction vendu chez ACTION (4.99€), il conviendra également pour d'autres de même diamètre (56) épaisseur (5.4) 2 models disponible 105mm et 115mm voir details sur les photos.
There's a Youtube video of a guy using a induction heater for bolts for annealing brass. I've been using his same method for a couple years now with great succuss. This is a heck of a lot cheaper then an AMP annealing machine!! When doing…
Simples but efficient support for headset with base which you could be include cellphone charge induction (Magic Safe). This model has two separate parts: base and stem for easy printing. No supports are required and can be produced in…
The original Powerflex phone holder is not suitable for holding phones in thick cases like mine. This modification utilizes the back of the original Powerflex holder (Opel part number 13471402) and adds a new front. The front is printed…
I use it to boil eggs in a pot with my induction stove with steam. Just fill in some water, make it boil. I think adding 1 minute to boiling time is appropriate. Doesn't melt the plastic because of the Leidenfrost phenomenon. When ready…
Small case for the Treedix TRX2-0033 mini ZVS induction heating module. Useful in mycology and lab work for sterilizing needles and scalpels. Lid can be held down with tape or glue. If you use my Amazon Affiliate Links I get a kick back:…
Just another funnel for the Bialetti Moka induction. 😊 The coffee funnel is a practical accessory designed for Bialetti Moka Induction coffee makers. Key features: 55 mm Inner Diameter : This funnel is specifically crafted to fit the…
Just another tamper for the Bialetti Moka induction. 😊 Use this tamper to slightly compress ground coffee before brewing. Technical Specifications: Inner Diameter : 54 mm Material : PLA (or any other suitable filament) See my matching…
Just another tamper for the Bialetti Moka induction. 😊 Thin version of https://www.printables.com/model/795330 Technical Specifications: Inner Diameter : 54 mm Material : PLA (or any other suitable filament) See my matching funnel:…
Small case for the Treedix TRX2-0033 mini ZVS induction heating module. Useful in mycology and lab work for sterilizing needles and scalpels. Lid can be held down with tape or glue. This version is slightly larger than the last to…
Adafruit has an amazing induction coil & LED set, so I needed to do something with it... having printed 20 articulated dragons from Design 26 I thought this would be a good test of it. I used Tinkercad to cut the eyes out of the…
BMW E46 3 SERIES frame for induction charging final v4 needs support infil 50 Category: Automotive
Case for 65W induction coil for heating and sterilizing metal components. Design has space for a DC power adapter port, Mosfet, threaded illuminated power button as well as the core electronics and ceramic coil insulator (Guitar Finger…
A ring to place around the knobs of an Aga Mercury Induction cooktop to better indicate what temperature the knob is pointing to. Works on all knobs. PRINT ----- Used PETG, 15% infill To Use Remove the rubber ring around each knob Then…
Description Remix to fit my iphone XS and my no-brand induction charger Based on iPhone XR Wireless Induction Charger Cradle , all credits for initial design are going to @mikebald_19076, thanks ;) Printing instructions Just print in…
