Dynavap induction charger plate Pelican 1120
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a different version that I designed to hold 3 vapcaps, and also change up the layout, and the amount of…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 593
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
This is a different version that I designed to hold 3 vapcaps, and also change up the layout, and the amount of components.
Change log:
First, I got rid of the power indicator. The momentary button switch I currently use has a light on it when pressed, this was sufficient.
Second was switching from a toggle power switch to a spring switch. It has a maximum wind time of 15 minutes.
Third was adding a few .1mm slices around the hole for the switch. Using 2 walls allows me to swap the filament for the outline of this for the first layer, giving a bit of a decorative design, that also serves as indicator lines.
Fourth was the addition of a custom knob. I added space on the top to house a 12x3mm magnet as a cooling station.
Fifth, I added an accessory rack to hold my 3 favorite vapcaps. This will make sure that I always have one for a friend if I take this anywhere.
Sixth, I added some zip tie hooks to secure everything down.
Seventh, I made it flush mount instead of inset.
I'll link to the updated parts. If you're copying this design, use the same products listed in the original, with these changes:
Magnets - https://www.amazon.com/gp/product/B07BK5KYVD
Instead of the Toggle Switch, use this Spring Switch - https://www.amazon.com/gp/product/B002RL9UYC
Ditch the 12v Power LED
Category: Gadgets