1 / 4
IKEA SANDVEDEL Roller Blind Handle Replacement Clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement handle for IKEA SANDVEDEL roller blind – clips on and adds a front-facing swinging grip.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 231
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- GNU General Public License v2.0
Description
This is a replacement handle for the IKEA SANDVEDEL roller blind. It clips onto the bottom rail and adds a practical, front-facing swinging handle to make pulling the blind down easier and more intuitive.
Features
- Designed specifically for the IKEA SANDVEDEL roller blind
- Clip-on mounting – no screws or glue required
- Swinging handle for improved accessibility
- Easy to print and assemble
- Clean, minimal design
Assembly
You’ll need a small pin (e.g. metal wire, approx. 1.6 - 1.7 mm diameter / 28mm length) to connect the hinge.
- Print Settings
- Material: ABS (tested)
- Layer height: 0.1 mm
- Walls / Perimeters: 4 wall loops for extra strength
- Supports: Recommended for the hinge section
- Infill: 20–30%
Note
Make sure to check the fit gently before applying pressure. Dimensions are designed to match the current SANDVEDEL model.