1 / 8
Onewheel Race For The Rail (RFTR) Replica Trophy Swords XR/GT — zdjęcie 1
1 / 8

Onewheel Race For The Rail (RFTR) Replica Trophy Swords XR/GT

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replica RFTR sword display for Onewheel rails

Ocena
5 / 5
Polubienia
16
Pobrania
71
Wydruki
1
Wyświetlenia
582
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Props
Licencja
Creative Commons — Attribution

Wanted to do something with my rails lying around, so I re-created the 2017 and 2022-2024 Race for The Rail trophy swords. Both are designed for the left rails of a board, with the hole closest to the bottom. I recommend printing these with fairly thick walls and at an angle if you want to have any decent chance at being able to swing them comfortably. They're mainly display models and not at all meant for combat use (unless CNC'ed).

GT Sword

  • Works with stock GT/S rails (WTF's also tested to work)
  • One Print
  • Cap held on through charger port with m2/3 bolt through whole assembly
  • Hole for heat set insert on side for more structure to use standard GT screw

XR Sword

  • Works with V1/Plus/XR rails (Varials also tested to work)
  • Solid and 2 part version 
  • Split version requires 2 extra m4 heat set inserts, can use stock short XR screws
  • Cap held on through button hole with m2 bolt through whole assembly
  • Holes for heat set inserts on side for more structure to use standard XR screws

Tagi