1 / 6
Fractal Vise for Revopoint Dual Axis Turntable
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fractal Vise to securely hold objects intended for 3D scanning on the Revopoint Dual Axis Turntable
- Ocena
- 5 / 5
- Polubienia
- 353
- Pobrania
- 627
- Wydruki
- 2
- Wyświetlenia
- 6069
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (12)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (468)Powiązane
Fractal Vise for use with Revopoint Dual Axis Turntable
I designed this around Teaching Tech's already excellent fractal vise.
Hardware used was focused on what I already had on hand. STEP file included so you can modify to your heart's content to suit your needs.
Printing Settings:
- All STLs are oriented for printing
- PLA or other similar stiff plastic
- Ensure it is dialed in properly. Tolerance between most mating features is 0.15mm
- 0.2mm layer thickness, 3+ walls at 0.4mm
- Sliding Pivot, Set Pivot, 2B1, 2B2, 2C1, and 2C2 should be printed at a finer layer height (0.12 or 0.1) to allow smooth motion of the rotating pieces
- Sliding Base and Set Pivot have areas that will need supports. Recommend painted on. Supports otherwise not required
Printed Parts
- 16x D.stl
- 4x 2C1.stl and 2C2.stl
- 2x 2B1.stl and 2B2.stl
- 1x everything else
Hardware:
- 2x M3x40mm socket head screws
- 4x M3x20mm socket head screws
- 8x M3x12mm socket head screws
- 6x M3x10mm socket head screws
- 2x M3x25mm socket head screws
- To attach Set Base to Turntable Base. Can be replaced with 2 more 20mm screws, if 25mm unavailable
- 14x M3 hex nuts
- 8mmx135mm Lead Screw
- Longer can be used.
- T8 Nut for lead screw
- I used the 2 screw, flat sided version you see on many 3D printers. Larger, flanged (round) will not work
- 608zz Bearing
- 2x M6x8mm socket head screw (to attach base to turntable)
Assembly
- Assembly of the fractal components is identical to TeachingTech's
- Insert M3 hex nut to the 2__1 part, slide onto it's mating surface, then align and screw on the matching 2__2 part, joining the flat sides.
- Some parts have small holes. This is to allow small pieces of filament to be inserted to assist with maintaining alignment.
- Parts D will need holes punched to allow M3 to be inserted
- Parts D mate vertically with 1 M3 12mm and 1 hex nut connecting the two
- Insert M3 hex nut to the 2__1 part, slide onto it's mating surface, then align and screw on the matching 2__2 part, joining the flat sides.
- The Knob is a hard fit to the lead screw. I added a few drops of superglue to ensure a tight fit
- The M3 screws will tap into the plastic parts they secure into
- (I know I should have used heat set inserts, but it's working great as-is. Maybe later?)
- The 608ZZ bearing is used to support the Lead Screw. Press Fit into Set Base and Set Pivot after they are assembled.
- The clamps can pivot out of the way to allow screws to be installed securing Set Base to Turntable Base
- Reference Image:

