1 / 6
Fractal Vise for Revopoint Dual Axis Turntable — image 1
1 / 6

Fractal Vise for Revopoint Dual Axis Turntable

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Fractal Vise to securely hold objects intended for 3D scanning on the Revopoint Dual Axis Turntable

Rating
5 / 5
Likes
353
Downloads
622
Makes
2
Views
6,033
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

Fractal Vise for use with Revopoint Dual Axis Turntable

I designed this around Teaching Tech's already excellent fractal vise.

Hardware used was focused on what I already had on hand. STEP file included so you can modify to your heart's content to suit your needs.

 

Printing Settings:

  • All STLs are oriented for printing
  • PLA or other similar stiff plastic
    • Ensure it is dialed in properly. Tolerance between most mating features is 0.15mm
  • 0.2mm layer thickness, 3+ walls at 0.4mm
    • Sliding Pivot, Set Pivot, 2B1, 2B2, 2C1, and 2C2 should be printed at a finer layer height (0.12 or 0.1) to allow smooth motion of the rotating pieces
  • Sliding Base and Set Pivot have areas that will need supports. Recommend painted on. Supports otherwise not required

Printed Parts

  • 16x D.stl
  • 4x 2C1.stl and 2C2.stl
  • 2x 2B1.stl and 2B2.stl
  • 1x everything else

 

Hardware:

  • 2x M3x40mm socket head screws
  • 4x M3x20mm socket head screws
  • 8x M3x12mm socket head screws
  • 6x M3x10mm socket head screws
  • 2x M3x25mm socket head screws
    • To attach Set Base to Turntable Base. Can be replaced with 2 more 20mm screws, if 25mm unavailable
  • 14x M3 hex nuts
  • 8mmx135mm Lead Screw
    • Longer can be used.
  • T8 Nut for lead screw
    • I used the 2 screw, flat sided version you see on many 3D printers. Larger, flanged (round) will not work
  • 608zz Bearing 
  • 2x M6x8mm socket head screw (to attach base to turntable)

Assembly

  • Assembly of the fractal components is identical to TeachingTech's
    • Insert M3 hex nut to the 2__1 part, slide onto it's mating surface, then align and screw on the matching 2__2 part, joining the flat sides.
      • Some parts have small holes. This is to allow small pieces of filament to be inserted to assist with maintaining alignment.
    • Parts D will need holes punched to allow M3 to be inserted
    • Parts D mate vertically with 1 M3 12mm and 1 hex nut connecting the two
  • The Knob is a hard fit to the lead screw. I added a few drops of superglue to ensure a tight fit
  • The M3 screws will tap into the plastic parts they secure into
    • (I know I should have used heat set inserts, but it's working great as-is. Maybe later?)
  • The 608ZZ bearing is used to support the Lead Screw. Press Fit into Set  Base and Set Pivot after they are assembled.
  • The clamps can pivot out of the way to allow screws to be installed securing Set Base to Turntable Base
  • Reference Image:

 

Tags