Mostly-Printed Rack & Pinion XYZ machine (MPR&P)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modular mostly-printed 3-axis machine... made up of 3 near-identical linear stages.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 41
- Wydruki
- 1
- Wyświetlenia
- 291
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Share Alike
This is a modular mostly-printed 3-axis machine made up of 3 near-identical linear stages. It is in the style of MPCNC using ¾" EMT conduit, “608” skate bearings, 5/16"(8mm) hardware, and numerous printed parts. It was built mostly from a junkbox/stash of dismantled MPCNC-inspired machines and parts… built, used, and moved several times over the years.
A work-in-progress, the development, building, and testing of this machine is detailed in the following V1Engineering forum thread… https://forum.v1e.com/t/printed-r-p-x-y-z-platform-from-mpcnc-junkbox/48648.
The carriage on all X and Y linear stages is near-identical and the Z-axis – while NOT identical – is similar and still R&P and seen in action in the following video…