Mostly-Printed Rack & Pinion XYZ machine (MPR&P)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a modular mostly-printed 3-axis machine... made up of 3 near-identical linear stages.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 41
- Makes
- 1
- Views
- 293
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Share Alike
This is a modular mostly-printed 3-axis machine made up of 3 near-identical linear stages. It is in the style of MPCNC using ¾" EMT conduit, “608” skate bearings, 5/16"(8mm) hardware, and numerous printed parts. It was built mostly from a junkbox/stash of dismantled MPCNC-inspired machines and parts… built, used, and moved several times over the years.
A work-in-progress, the development, building, and testing of this machine is detailed in the following V1Engineering forum thread… https://forum.v1e.com/t/printed-r-p-x-y-z-platform-from-mpcnc-junkbox/48648.
The carriage on all X and Y linear stages is near-identical and the Z-axis – while NOT identical – is similar and still R&P and seen in action in the following video…