Voron 0 Side Panels with Bento Mini Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pair of side panels to reduce the internal air volume.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 508
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
My Voron 0.2 has the printed tophat extenders which increase the internal air volume (a worthwhile tradeoff to prevent the umbillical from rubbing). With both side panels installed, the lower chamber thermistor can reach 50 degrees and the upper chamber thermistor near the A/B motor reaches nearly 60 degrees. This is also with a bath towel over the top of the printer.
This is also an improvement over my previous remix which was printed in two parts and superblued together. That felt like it was likely to separate over time and that heat was leaking through the panels. I also removed the 30mm fan mount (as I repurposed that to be a bed fan).