In-frame mounting of IKEA PARASOLL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount an IKEA PARASOLL door contact sensor inside a window frame.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This print allows you to convert an IKEA PARASOLL door contact sensor and mount it inside a window frame. While highly specific, this works for my Roto turn-tilt windows.
First of all, the IKEA PARASOLL needs to be disassembled and converted for 3V batteries (CR2450), because an AAA battery does not fit. You can find instructions here.
After printing, mount the PCB with the button down. Solder two solid metal wires to the battery contacts, such that the CR2450 makes contact with these wires. Then mount the lid and use a self-tapping screw. Make sure to sink it into the body, to prevent it from sticking out.
Once completed, mount it into the window (as demonstrated on the photo). Carefully close the window to see if it does not collide. The magnet must be replaced with a small round magnet that can be mounted on the inside of the window. Its position must be carefully matched with the sensor, so take your time.
Print settings:
- PLA or PETG
- 100% infill (thin part, doesn't really matter)
Printed this on a Bambu Lab X1C with eSUN PLA matte.