1 / 2
Retro Detroit Tigers Magnet (Low Waste)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Detroit Tigers logo from 1993, designed in hueforge for low waste/swaps
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
🐯⚾🧲Detroit Tigers Retro Logo Magnet🧲⚾🐯
Print Details: 100% infill, 0.04mm layer height (0.16mm base)
Size: 60x60x2.36mm (includes 8x1.5mm magnet slot) (Easily Resizable)
Filament Usage: 8.27g
Print Time: 36m
⚠ Important: You must manually change your printer settings to allow 0.04mm layer heights. This print uses my custom HueForge print settings, which turns all fans off. If your printer is fully enclosed, make sure to crack the door/top or manually turn the fans back on to avoid overheating issues.
Filaments Used (3 Colors):
- 🏳 Ivory White (TD: 3.5)
- 🔵 Dark Blue (TD: 1)
- 🔴 Scarlet Red (TD: 1.8)
Swap Instructions:
1 Start with Ivory White
2 Layer #48 (2.04mm) – swap to Dark Blue
3 Layer #52 (2.2mm) – swap to Scarlet Red (for the rest)