1 / 5
SKR 3 EZ to CR-30 MCU Adapter — zdjęcie 1
1 / 5

SKR 3 EZ to CR-30 MCU Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Install a SKR 3 EZ into your CR-30 / 3DPrintMill

Ocena
0 / 5
Polubienia
1
Pobrania
8
Wydruki
0
Wyświetlenia
57
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This model will allow you to use the BTT 3 EZ in your CR-30, using the stock board mounts. You will not be able to reach the SD Card through the front opening, so you will have to upload via a WebUI like Mainsail or Octoprint. Unfortunately, you may not be able to close the base plate all the way, depending on your driver configuration.

Printed In PLA

Tagi