1 / 7
Fix for Creality Space Pi - bowden tube filament holder / adapter / guide — zdjęcie 1
1 / 7

Fix for Creality Space Pi - bowden tube filament holder / adapter / guide

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed to hold the PTFE tube in place, keeping it from being sucked into the dryer.

Ocena
5 / 5
Polubienia
139
Pobrania
1371
Wydruki
13
Wyświetlenia
3507
Oceny
16

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Improves the silicone rubber bushings that ship with the Space Pi Dryer and Space Pi (Plus). Designed to hold the end of the PTFE tubing in place, and prevent it from slipping inside the dryer. Does NOT work with the Space Pi X4.

Internal taper to hold tubing, low profile design, prints in minutes with a miniscule 0.27g of filament. Still works with the original silicone plug. 

Suggested printing config: PETG or better for heat resistance, 0.4mm nozzle. If the ID is too small to fit the tubing, try printing one of the larger sizes in the Other Sizes folder, or adjust your ID compensation in your slicer settings. 

[UPDATED 08/2025]: Added a folder of models with expanded and contracted internal diameters, to accommodate different printer configurations. If the default size doesn't work for you, try one of these instead.

Tagi