Mustang Mach-e Hydroflask Cup holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cup holder designed to hang on the side of the center console in the Mustang Mach-e. Two sizes available.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 124
- Wydruki
- 0
- Wyświetlenia
- 975
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I created this model to hold a full size hydro-flask in the Mustang Mach-e. This model hangs off the side of the console, leaving the other cup holders free for other beverages. I recommend you use this cup holder on the passenger side only - so that it does not hit your leg while driving.
I've provided two models - one for large hydro flasks, and the other for small hydro flasks. The small hydro flask model can also be used to fit normal sized beverage containers.
Note, this model was only tested on the 2024 Mach-e. If you print it for other years let me know and I will update this description.
Printing directions:
- No supports needed - designed to be printed in the orientation provided.
- Recommend using PETG to avoid melting on a hot day.
- I printed with 3 perimeters, with 15% infill.