Liczymy pasujące modele…
Expand your car or truck cup holder to secure a regular coffee mug or 32oz hydroflask. Center also can secure a can of Red Bull. Bottom is enclosed so the insert can be secured to the car cup holder. I used some velcro tape. Mugs that fit…
Stand for the long (15" or 380mm) Hydroflask bottle brush . All 3d-printed objects soak up moisture like a sponge--bottom is concave to reduce the contact surface with a wet countertop. Added "stripes" to the model as extra bodies, for…
I needed a cup holder for my water bottle on my 8040 sim rig, but all of the ones I could find online were sized for 1L Nalgene bottles, which are quite a bit narrower than my 1L insulated hydroflask bottle. This one has an internal…
I dropped my full 24oz hydroflask and damaged the base enough that it would not sit flat on any surface. It was like a weeble-wobble. After adding the boot, the bottle is stable again. I printed this out of Eryone 95A TPU on a MK4S using…
Ive always hated having my hydroflask rolling around in my truck. Designed a basic extended cup holder to allow me to secure my hydroflask/thermoflask while driving. I found a lot of the other models around just didnt fit my vehicles cup…
This was designed for my sister's 2007 Honda CRV. I think it would probably work for any 3rd gen CRV, so 2007 - 2010. This is an adapter so a Nalgene or Hydroflask, or similar sized water bottle can fit in the cup holder. The V1 model was…
Upgrade your Hydroflask game with this sleek, functional funnel designed to make filling wide-mouth bottles a breeze! Whether you're transferring water, smoothies, protein shakes, or any liquid of choice, this funnel ensures no spills and…
I needed a holder for my 40oz hydroflask that sits beside my desk and not on top of it. I have a small and tight space so my table would always be a clutter. I designed this to help clear my table as well as having a storage for my water…
Nalgene/Hydroflask mount for the Uppababy Vista stroller.
This a cup holder adapter for a 2018 Nissan Rogue. It holds the bottle at an angle for easier use of the arm rest. The is an optional lip that can be glued in place to hold the bottle more securely. I would recommend using it though the…
I created this model to hold a full size hydro-flask in the Mustang Mach-e. This model hangs off the side of the console, leaving the other cup holders free for other beverages. I recommend you use this cup holder on the passenger side…
HydroFlask 32oz bottle cupholder for Tesla Model 3 Highland center console. This is remixed from the original file on Printables to get the basic shape of the center console, and then redesigned around my water bottle. This is designed to…
This cupholder was originally too narrow and kept tipping over in my 2016 Kia Sedona cupholder. First I had made a TPU sleeve to fit the original design and that worked well (upload coming), but when the cupholder itself got stepped on…
This insert allows you to put your 92mm diameter Hydro flask in the cup holder since the factory one is not big enough.
This adapter will keep your Hydroflask from flying around the car. Simple print. Fits snugly around a 32 oz Hydroflask. Model files are provided in case you want to modify to fit a custom bottle. Parametric Design.
There are times when I need to know my water intake using a Hydroflask, to ensure I'm sufficiently hydrated. I keep a couple of them in my motorcycle panniers for longer rides. This cup fits over the top of a standard carry lid, or on the…
This 3D printable ring fits securely around a Hydro Flask wide mouth bottle and provides a built-in loop for attaching a paracord handle. It's a simple, rugged solution for carrying your bottle on hikes, at the gym, or just around town —…
Revision 2.0 - Made wall thickness 1.6mm, reduced diameter by 0.5mm for an interference fit, repaired a parametric design error with the top edge fillet. This boot fits the 40oz Hydroflask cup with silicone straw (as seen at Costco). It…
Revision 2.0 - Made wall thickness 1.6mm, reduced diameter by 0.5mm for an interference fit, repaired a parametric design error with the top edge fillet. This boot fits the 40oz Hydroflask cup with silicone straw (as seen at Costco). It…
Revision 2.0 Notes: Changed default parameters to improve fit and function. Reduced height of cap to 16mm. A TPU straw cover designed to fit the 10.5mm diameter silicone straw on the 40oz Hydroflask cup. The model is parametric so it…
Revision 2.0 Notes: Changed default parameters to improve fit and function. Reduced height of cap to 16mm. A TPU straw cover designed to fit the 10.5mm diameter silicone straw on the 40oz Hydroflask cup. The model is parametric so it…
This multipurpose car cup holder can hold just about any kind of bottle but will specifically hold must types of Hydroflasks up to 32oz. Due to cutting out as much material as I could and and having everything at an upward angle, there…
I designed this cup holder adapter for the Ford Expedition, was sick of the hydroflask not fitting. I designed up a couple variations some with a flat bottom or concave incase you want to fill it something to make the bottom heavier to…
This is a extension for a cup holder to hold a 32oz Hydroflask. There are two parts to print and you can use CA glue to join them together. This was designed for a 2021 Ford Explorer cup holder. The base extension reaches to the bottom of…
The handle mounting points broke off of our Ironflask bottle lid. As a substitute, this ring fits between the lid and the bottle body and has attachment points for the original handle. Simply pull off the original handle from the mounting…
Bottle holder for storing nalgene, wide hydroflask, and other water bottles.
The bottle accessory you didn’t know you wanted. Ever unscrew your Hydro Flask chug cap and immediately wonder, “Now where do I put this?” This attachment solves that tiny-but-annoying problem. It adds a flexible strap to a wide-mouth…
This is a Hydroflask boot with AirTag holder on the bottom. I made this after I lost one too many water bottles. The boot fits snuggly on a 24oz Hydroflask bottle. The design has an interior diameter of 73mm with a wall thickness of…
Thank you GarageMonkeySan for this well designed and practical tool! The original, and this remix, are shaped for fridges that dispense water separate from the ice. **If you have a combo Ice/Water dispenser, which many modern fridges do,…
Designed for the 40oz / 1.2L HydroFlask bottle. Measurements of the section that goes into the car's cup holder: Diameter: 7.5 cm Height: 5.72 cm
Insert for a HydroFlask Boot for containing an Apple AirTag. This model is two separate discs. Outer disc to be printed in a harder impact material, PLA, PTEG, ASA, ABS. As well as an Inner disc to be printed in a softer cushioning…
If you are like me, you like to wander around the shop and place your coffee in some obscure location while working on a project only to find it hours later and completely cold. Not anymore! If you still manage to misplace the brightly…
Didn't want to shell out money for a flimsy Hydroflask boot made of silicone. I decided to test my dimensioning skills and make this to add to my resume for personal projects. Enjoy. Printed in PLA. Use whatever settings you normally use…
Model designed to fit securely into the front center console drink holders in a 2018 and newer Ford Expedition. It also works with newer F150 models, just not as perfectly. The model will accommodate most one-quart water bottles and…
This plate was designed to quickly install in the tiny front cup holder area of the Audi Q5. It has a ridge to accommodate quart-sized water bottles or normal coffee/tea mugs. Note that a water bottle can still tip over with spirited…
Rings print with no supports. Handle can print without on a dialed in printer, however, adding supports only means you need a little clean up if you want that assurance of no dangle strings. Multiple sizes available to accommodate slight…
I designed this insert for 2022 Rivian R1S (it's incredible). But like most vehicles, there is no convenient place to hold a 32oz water bottle. If you love your Hydroflask or Nalgene bottle, you know what I mean. The same goes for…
Print with TPU flexible filament. It is a bit tough to stretch over the buttons on the lid but if I can do it you can too! I've included the .step file so you too can add text in CAD.
This model is specifically designed to fit in a 2016 Ford Escape cup holder but would likely fit in other vehicle cup holders.
32oz Hydroflask adapter for 2016 VW Tiguan Cupholder . I included a custom support from original model in 3mf with 0.2mm gap modified for: sparse infill, no top, and no perimeter (break away was trivially easy). Made in Polymaker ASA…
3-piece modular cup holder for F-150 Inserts anchor down into existing cupholder using built in spring clips and expose M5D8L9 heatset inserts on top, spaced 4.5" center to center. Cupholder itself fits silicone booted hydroflask/Nalgene…
This model is best printed in TPU or another flexible filament so it still protects your hydroflask. I printed the one shown in Overture TPU at the following settings on my Prusa mk3s+: Layer height: 0.2mm All speeds: 20 mm/s Infill:…
A simple adapter to fit a standard sized Hydroflask in the Tesla Model 3 cupholder. A clearance cut ensures it won't interfere with the other cupholder. The base is hollow allowing for extra storage while reducing material usage. Edges…
Yes, this is yet another bottle drying stand. This one is specifically for Hydroflask and compatible bottles, such as Takeya and EcoVessel. I found that the universal ones didn't keep the bottle from falling over if it shifted to the…
UPDATE 8/24/20: I've added Fusion 360 and STEP files for easier remixing. Sorry for not adding them sooner! I'm not hardcore about my bike nor about bike stuff, but I do care about having a good water bottle with me when I ride. So I made…
Remix of the existing adapter from Tex. Modified to fit a large hydroflask that's fitted with the protective boot.
Replacement handle for Vmini straw lids, and potentially others like it. Replace the old handle by pushing out the pin, and re-inserting it with the new handle. I highly recommend printing in a high-temp material to reduce cracking after…
This expands the front center console cup holders to accommodate a 32 or 40-oz hydroflask in a Toyota RAV4 Prime. It may work with other RAV4's as well. Please use it at your own risk, as I take no responsibility if it causes any damage…
I have used Hydro Flask and Coffee Mug MODULAR Car Cup Holder Adapter by strongcraig on Thingiverse for my full-sized hydroflask, but I needed something to stabilize my 32oz Trail Lightweight version (skinnier) so I created this insert…
If you leave your hydroflask in the car, make sure you print with PETG or another high-temperature plastic. PLA will deform in the 140F temps of a car on a hot day.
I needed a stable holder for my 32oz Hydroflask water bottle and Yeti coffee mug when driving my HMMWV. It is bolted directly to the vehicle using sheet metal screws. So far it is working very well.
I'm a pretty simple guy: I just want to be able to wake up in the middle of the night and drink my water from a straw without making a huge mess. Unfortunately, I'm also an idiot who keeps knocking over my water bottle every time I try to…
This is an odd creation. My daughter lost her ThermoFlask, we walked around her entire school and never found it. I got the bottle as a 2-pack from Costco, I didn't want her to lose the other one and be forced to buy another two. So I…
This is a simple replacement lid for Hydroflask water bottles with a “standard” width mouth. Without a rubber ring, the lid doesn't form a perfect seal - you still get a tiny bit of leakage if the bottle is tipped. Print with minimal…
I needed cupholders for the middle seats of my Tesla Model X. This fits the 2020 6-seater seats and hooks onto the seat next to the seat belt holders as shown in the picture. The cupholder size is designed to fit a 32oz or 40oz…
The hose clamp wraps around 32 oz to 40 oz Stanleys and Hydroflasks. It is recommended to use a more flexible plastic when printing the hose clamp if you want the device to wrap around the handle of the water bottle. The flat clamps are…
Keeps dirty hands/fingers from touching the flask lip that ends up being put in our mouths. Also keeps my cats' noses away from it :) Category: Sport & Outdoors
Made this one a little larger to accommodate the rubber boot.
Stand for the long (15" or 380mm) Hydroflask bottle brush . All 3d-printed objects soak up moisture like a sponge--bottom is concave to reduce the contact surface with a wet countertop. Added "stripes" to the model as extra bodies, for…
Printed in TPU using a Bambu Lab P1P. Supports needed for design.
