1 / 2
Standard Mouth Hydroflask Lid
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basic stopgap replacement lid for a standard mouth Hydroflask water bottle.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
This is a simple replacement lid for Hydroflask water bottles with a “standard” width mouth.
- Without a rubber ring, the lid doesn't form a perfect seal - you still get a tiny bit of leakage if the bottle is tipped.
- Print with minimal layer height, in order to minimize gaps that water could sneak into. Orient top-down, with supports for the screw threads.
- It's counterintuitive, but I would recommend printing with PLA - it's human safe, so residue and possible plastic bits in the water are less of a concern. (Doctors use PLA for temporary implants, because the body can break it down into harmless lactic acid - the same chemical responsible for the “burn” you feel when exerting your muscles.)