1 / 2
Standard Mouth Hydroflask Lid
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Basic stopgap replacement lid for a standard mouth Hydroflask water bottle.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 59
- Makes
- 0
- Views
- 313
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
This is a simple replacement lid for Hydroflask water bottles with a “standard” width mouth.
- Without a rubber ring, the lid doesn't form a perfect seal - you still get a tiny bit of leakage if the bottle is tipped.
- Print with minimal layer height, in order to minimize gaps that water could sneak into. Orient top-down, with supports for the screw threads.
- It's counterintuitive, but I would recommend printing with PLA - it's human safe, so residue and possible plastic bits in the water are less of a concern. (Doctors use PLA for temporary implants, because the body can break it down into harmless lactic acid - the same chemical responsible for the “burn” you feel when exerting your muscles.)