64oz Hydroflask Handle and Rings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Credit to HespoHusky at https://www.thingiverse.com/thing:2255522 for the design inspiration.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 78
- Wydruki
- 1
- Wyświetlenia
- 513
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Rings print with no supports. Handle can print without on a dialed in printer, however, adding supports only means you need a little clean up if you want that assurance of no dangle strings.
Multiple sizes available to accommodate slight variations and if you want to use a TPU boot.
If you use a TPU boot, then you'll want to print one larger ring that grips onto that.
Note: Don't over-tighten the screws or you can add unnecessary stress risers in the ring. Tighten until the handle is secure, but no further. I had a handle break due to over-tightening.