64oz Hydroflask Handle and Rings
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Credit to HespoHusky at https://www.thingiverse.com/thing:2255522 for the design inspiration.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 78
- Makes
- 1
- Views
- 513
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Rings print with no supports. Handle can print without on a dialed in printer, however, adding supports only means you need a little clean up if you want that assurance of no dangle strings.
Multiple sizes available to accommodate slight variations and if you want to use a TPU boot.
If you use a TPU boot, then you'll want to print one larger ring that grips onto that.
Note: Don't over-tighten the screws or you can add unnecessary stress risers in the ring. Tighten until the handle is secure, but no further. I had a handle break due to over-tightening.