Artillery SW4 Pro Gantry Cable Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is a flat cable support for the Artillery Sidewinder X4 Pro to avoid the sagging of the cable
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 76
- Wydruki
- 1
- Wyświetlenia
- 405
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- BSD License
The artillery printer is quite a robust printer and champ for its price tag. But one of the most common issue with this printer is that the print head cable that sags and gets closer and closer to the printing table. This is so critical that it allows the cable to disturb the ongoing print.
Printed it in PETG standard settings.
There is a dowel on the design to help fixing it. Use a short 4mm self tapping screw. You can cover the dowel with heat shrinking tube for better grip, since PETG is quite slippery for that use.
Note: I didn't tested it, but I think this will also work for the SW-X4 Plus model.