Artillery SW4 Pro Gantry Cable Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is a flat cable support for the Artillery Sidewinder X4 Pro to avoid the sagging of the cable
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 76
- Makes
- 1
- Views
- 405
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- BSD License
The artillery printer is quite a robust printer and champ for its price tag. But one of the most common issue with this printer is that the print head cable that sags and gets closer and closer to the printing table. This is so critical that it allows the cable to disturb the ongoing print.
Printed it in PETG standard settings.
There is a dowel on the design to help fixing it. Use a short 4mm self tapping screw. You can cover the dowel with heat shrinking tube for better grip, since PETG is quite slippery for that use.
Note: I didn't tested it, but I think this will also work for the SW-X4 Plus model.