NorthEast FAMAS - Sling Mount Stopper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stopper to be used in place of a bipod leg which prevents the sling mount from coming off.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Public Domain
Stopper to be used in place of a bipod leg which prevents the sling mount from coming off.
Hardware Required:
M4 10mm screw
Printing Instructions:
Print from the flat face with any suitable material. No support material should be necessary.
Assembly Instructions:
Thread the stopper onto the bipod leg mount where you want to attach your sling mount, make sure to orient the stopper so the sling mount can be attached on top of it. After that, simply rotate both the stopper and sling mount until the hole in the stopper is facing toward the buttstock. Finally, screw in the M3 screw to secure the stopper in place.
NOTE: The construction of the bipod leg mount on the PGMP is slightly different from the standard PGM, because of this it is possible that the M3 screw might slightly dig into the the metal of the bipod detent. This should only cause cosmetic damage, but if you're concerned, you could file the tip of the screw to a taper to more gently interface with the bipod leg mount.