1 / 2
NorthEast FAMAS - Sling Mount Stopper — image 1
1 / 2

NorthEast FAMAS - Sling Mount Stopper

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Stopper to be used in place of a bipod leg which prevents the sling mount from coming off.

Rating
0 / 5
Likes
3
Downloads
20
Makes
0
Views
239
Reviews
0

Updated at source:

Model information

Category
Other Sports
License
Creative Commons — Public Domain

Stopper to be used in place of a bipod leg which prevents the sling mount from coming off.

Hardware Required:

  • M4 10mm screw

Printing Instructions:

Print from the flat face with any suitable material. No support material should be necessary.

Assembly Instructions:

Thread the stopper onto the bipod leg mount where you want to attach your sling mount, make sure to orient the stopper so the sling mount can be attached on top of it. After that, simply rotate both the stopper and sling mount until the hole in the stopper is facing toward the buttstock. Finally, screw in the M3 screw to secure the stopper in place.

NOTE: The construction of the bipod leg mount on the PGMP is slightly different from the standard PGM, because of this it is possible that the M3 screw might slightly dig into the the metal of the bipod detent. This should only cause cosmetic damage, but if you're concerned, you could file the tip of the screw to a taper to more gently interface with the bipod leg mount.

Tags