1 / 3
Shim for Karoo bike mount for 26 mm handlebars
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To adapt the original Karoo bike mount for 31.8 mm to a classic handlebar (26 mm).
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this as a shim for adapting the original Karoo bike mount for 31.8 mm to a classic handlebar (26 mm). You have to remove the original rubber inserts first.
I printed with 95A TPU with 100% infill and no supports laying flat on the side. This version has a recess on the inside to place a 10 x 74 mm strip of some rubbery material (I cut this from an old bicycle tube). This greatly enhances the friction compared to just the TPU.