Easter door corner Print without MMU

Simple printable model.

Individual color layers are printed separately without MMU unit.

No locks, for ease of assembly and printing I chose to fix the individual parts with superglue.

Glued parts of the lawn create a tunnel into which individual models are inserted.

You can now create your own characters with a width of 1.2 mm and simply insert them into the lawn.

Models can be assembled and combined as desired.

Printed with PetG or Pla, whichever color is available, I mostly printed with PetG

0,2mm structural

0,4n

Sometimes I slightly reduced the temperature from the default setting according to the filament, rather experimentally see 3mf files

when printing the lawn I chose the perimeter generator on classic, arachne made errors when printing the tips of the lawn, see photo

Grass seting print

arachne settings printed first the tips and then the circuits this can sometimes cause filament sticking and errors

I always print the view side on the mat, you can change the view to L or R by setting

This is how grass is printed: the front side is on a grainy backing

This is how the parts are assembled

Gluing the grass creates a 1.2mm wide slit into which you insert animal models

you can create your own animal and put it in grass

it is necessary to maintain the model thickness of 1.2mm

I experimentally tried printing an egg model from two parts with a tolerance of 0.1mm and a perimeter overlap of 25%
When I printed the model, it remained stuck together and can be carefully broken apart, try it

I also added a model with manual filament replacement, but I didn't try this option, I chose to glue two pieces together