Concrete filled almost totally printed mini CNC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Its a 3d printed CNC that needs to be filled with concrete to make it extremely solid.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 1001
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a CNC mill that is printable, with the exception of some hardware for the linear rails and drives. The Z-axis is a premade aluminum, using in what i believe is the 3018pro. The chassis of the CNC is glued and several M6 threaded rods are installed. After this it can be filled with concrete. The result is a very heavy and stable mini CNC frame. I am at this moment still testing it out. The controller I am using is the MKS DLC32 v2.1 with the standard firmware.
It has been design to be used for light milling while using double sided tape to hold the stock to the bed.
I hope to upload a more complete parts list later.