Ninja Thirsti Dust Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple dust cover for the water tank area.
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I created this dust cover after finding a very basic one that didn't allow the area underneath to get air to dry in between uses.
This design covers the water pitcher base on the machine with at least 1-2mm gap to allow air so it can dry naturally. I've also beveled the sides to help fit the machine better.
The walls are 1.2mm thick as you don't need much plastic for this. I printed mine using Sunlu Silk Black TPU on a Bambulab P1S.
Updated on 2025-04-13 - Changed inner fin height to improve moisture evaporation. Also added a STEP file version.
Updated on 2026-01-12 - Added a thicker version.