Hanger Dots
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Now with even more styles to choose from!
This is a wall hanger designed to be easy to use.
- Screw base into wall
- Screw cap onto base
- Enjoy
Notes:
- Included is a base and baseDeeper, depending on how much plastic you want between you and the wall.
- As long as threads are the same, different shaped caps can be used.
I have had 6 hanging in use in my kitchen since Aug 2019 without a single issue.
Print instructions
Category: Organization Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: Doesn't Matter
Supports: No
Resolution: .2
Infill: 20
Filament: CC3D (any will work better) PLA Silk Copper
Notes:
Printing the dots upside down will usually provide better adhesion - Threads to the sky.
Threads are M18.
The easiest way to hang the base is to drill a pilot hole in the wall. Then nudge the screw through the base, as seen in the picture above. Use the tip of the screw to find the pilot hole.
Included you will also find a dotInsert which will allow you to attach objects to your hangers!
Post-Printing
dotInsert file
With the dotInsert file you can now turn your prints into hangers!
Rest assured, there is enough plastic to cover the threads and provide stability.
Simply remove a 20mm x 6mm cylinder from your print and glue in the dotInsert.
Dim:
- diameter = 20mm
- height = 6mm