Dillon XL650 / XL750 Tool Head Holder WALL MOUNT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dillon XL650 / XL750 Tool Head Holder WALL MOUNT
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are tool head holders for wall mounting. I made these as an alternative for the slide in ones. These are easier to print as well.
Works with the XL650/750 Tool heads.
I made the screw holes to work with the 50lb plastic anchors screws from homedepot or lowes. (E-Z Ancor #25350)
I'm using a 0.6 Nozzle and print time is about 3.5hrs per print. This is at a .3 layer height.
I only made the ones I needed, they are labeled on the front. If you need one for a caliber you don't have, let me know.
Print Settings:
I did these with the following, they are strong in my opion and I tugged on them just to check they wont fall;
Prusa Slicer
0.3 Layer Height
Gyroid Infill
15% Infill
0.6 Nozzle
Print Settings
- Printer brand:
Prusa
- Printer:
I3 MK3S
- Rafts:
No
- Supports:
No
- Resolution:
.3 with (0.6 Nozzle)
- Infill:
15% Gyroid
