1 / 3
Dillon XL650 / XL750 Tool Head Holder WALL MOUNT — image 1
1 / 3

Dillon XL650 / XL750 Tool Head Holder WALL MOUNT

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Dillon XL650 / XL750 Tool Head Holder WALL MOUNT

Rating
0 / 5
Likes
0
Downloads
14
Makes
0
Views
109
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

These are tool head holders for wall mounting. I made these as an alternative for the slide in ones. These are easier to print as well.

Works with the XL650/750 Tool heads.

I made the screw holes to work with the 50lb plastic anchors screws from homedepot or lowes. (E-Z Ancor #25350)

I'm using a 0.6 Nozzle and print time is about 3.5hrs per print. This is at a .3 layer height.

I only made the ones I needed, they are labeled on the front. If you need one for a caliber you don't have, let me know.

Print Settings:
I did these with the following, they are strong in my opion and I tugged on them just to check they wont fall;

Prusa Slicer
0.3 Layer Height
Gyroid Infill
15% Infill
0.6 Nozzle

Print Settings

  • Printer brand:

Prusa

  • Printer:

I3 MK3S

  • Rafts:

No

  • Supports:

No

  • Resolution:

.3 with (0.6 Nozzle)

  • Infill:

15% Gyroid

Tags