1 / 5
Prusa MINI fill for aluminium profile groove
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fills for each groove on your MINI.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 474
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (14)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
R2_F is for upgraded base with a brace ↓ and R2_F_V2 is for base from manufacture.
https://www.prusaprinters.org/prints/51415-prusa-mini-z-axis-brace
R3 is for stabilised Z bottom ↓ and R3_V2 is for base from manufacture.
https://www.prusaprinters.org/prints/51749-stabilised-prusa-mini-z-bottom
Z2 is for updraded cable management ↓ and Z1 is for basic MINI.
https://www.prusaprinters.org/prints/27742-prusa-mini-cable-chains-x-axis-motor-heatbed
PS: If you don't want to use my g-codes, I advice this:
- Layer hight: 0,2mm
- Nozzle: 0,4mm
- Material: PLA/Petg
- For connection pin: Infill modificator cube → infill 30%
- 10mm brim → if you will trying to print it lying, it won't fit in there (my experience ;) )
- You can increase printing speed to 150% for shorter printing time, but when your printer will printing connection pin, you must decrease speed down to 50%, because the model is tall and it will sway and connection pin will be awful
