1 / 5
Prusa MINI fill for aluminium profile groove — image 1
1 / 5

Prusa MINI fill for aluminium profile groove

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Fills for each groove on your MINI.

Rating
0 / 5
Likes
5
Downloads
38
Makes
0
Views
474
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

R2_F is for upgraded base with a brace ↓ and R2_F_V2 is for base from manufacture.

https://www.prusaprinters.org/prints/51415-prusa-mini-z-axis-brace

R3 is for stabilised Z bottom ↓ and R3_V2 is for base from manufacture.

https://www.prusaprinters.org/prints/51749-stabilised-prusa-mini-z-bottom

Z2 is for updraded cable management ↓ and Z1 is for basic MINI.

https://www.prusaprinters.org/prints/27742-prusa-mini-cable-chains-x-axis-motor-heatbed

 

PS: If you don't want to use my g-codes, I advice this:

  •        Layer hight: 0,2mm
  •        Nozzle: 0,4mm
  •        Material: PLA/Petg
  •        For connection pin: Infill modificator cube → infill 30%
  •        10mm brim → if you will trying to print it lying, it won't fit in there (my experience ;) )
  •        You can increase printing speed to 150% for shorter printing time, but when your              printer will printing connection pin, you must decrease speed down to 50%, because        the model is tall and it will sway and connection pin will be awful

Tags