Search results: groove

Counting matching models…

Printables

Lego Compatible (42610.dat) Wheel Rim 8 x 11.2 with Centre Groove

This model is compatible with the lego system.

Printables

Tamiya - Tire for RC car rim - model 01 V-groove

A nice model for a RC car wheel with a diameter of 60 mm. Designed for tamiya rim of Dout 42 mm, width 24 mm, which is typically used in the Tamiya M-size. (Eg. M-05/06 MF01-X) The tire was designed as test for using flexible filament (…

Order a print of this model

Printables

Vise Pad with grooves - to fit Quick-Adjust Half-Nut Vise

This is a remixed pad to fit Quick-Adjust Half-Nut Vise by LoboCNC, it is better for holding PCBs or cylindrical parts. I made the pad a bit thicker, and have three V grooves at different heights. one on dead centre. Freecad .STEP and…

Order a print of this model

Printables

Vase « Grooved Pear »

Ce vase est issu d’une forme en « poire » que j’ai déjà utilisée pour deux autres designs : le vase (à lamelles et la lampe Solaris). Sa forme m’a semblé être excellente pour lui appliquer une déformation de surface avec pour motif une…

Order a print of this model

Printables

Groove Life Double Belt Holder

The Groove Life belts are great, but difficult to store because there is no clasp to loop around a hook. This is designed for a 15 X 2 mm magnet to be glued in the recess and hold the belt in place, just like the buckle itself when the…

Order a print of this model

Printables

Plates with rulers AND grooves to lock stuff

Some stuff I have to put on the plates must be hold by something. The holder will help lock them into place. You WILL need to print your own locking tool that will go into the holder, obviously, since your needs will probably be very…

Order a print of this model

Printables

"J" Groove Dishwasher Sign.

This is a classic sign to stop people putting dirty dishes in a clean dishwasher before you have chance to empty it. Modelled on our J groove fingerpull profile wooden doors for a built in dishwasher. The fingerpull diameter of the model…

Order a print of this model

Printables

Tight Light Bar Clip (20x20 groove 6 B-type)

Tighter tolerance for snug fit.

Order a print of this model

Printables

Gridfinity Screw Length Measuring Tool (V-Groove Ruler)

## Gridfinity Screw Measuring Ruler (1x2 Bin) This is a simple but essential tool for your Gridfinity setup. It allows you to quickly measure the length of your screws (M3, M4, M5, up to M12) simply by dropping them into the V-groove. ###…

Order a print of this model

Printables

Two Tier 50ml liqueur sampler Display with 5mm LED groove embedded

Designed and 3D printed this sleek two-tier mini bottle display to showcase 50ml liqueur and whiskey samplers in a premium way. The built-in LED light groove enhances each bottle with a clean underglow, creating a modern floating effect…

Order a print of this model

Printables

Gridfinity LITE Ultra Bins Compatible with GridFlock (ClickGroove)

Gridfinity LITE Ultra Bins Compatible with GridFlock (ClickGroove) This is a variation of a Gridfinity bin, specifically designed to work with GridFlock bases featuring the ClickGroove system by Yawkat . These bins are a remix of the…

Order a print of this model

Printables

Adjustable Inner Groove Caliper Tips

I've seen a few models for tips to allow calipers to measure the inside of objects with a rim. None of them are adjustable, however, so I made this. The pegs should friction fit with PLA. Without any pegs, the attachments add 3mm each.…

Order a print of this model

Printables

Instax SQ1 cam gear with extended groove

This is a 3D model for a spur gear inside the Instax SQ1 that has a cam for a follower that lifts the card up and advances the frame counter during each development cycle. On top of this gear there is a groove that the microswitch falls…

Order a print of this model

Printables

Magnet for aluminum profiles groove 8 / Nut 8

As i needed some magnets for closing my doors of my printer enclosure (build from alu-profile 30x30-Slot8) i designed some and inserted two 25x4x3 mm magnets. The print needes to be paused at layer 19 and then you insert the magnets and…

Order a print of this model

Printables

PanaVise Vise Jaws with PCB Groove

Replacement jaws for an old PanaVise. Make sure your vise has 42.5mm screw spacing, otherwise it won't fit. I printed this with 4 perimeters for strength.

Order a print of this model

Printables

ABL Flipsky VX4 (Regular and Pro) Case with Finger Grooves

This is a remix of @2vid's VX4 Pro remote case, intended to be printed out of rigid material (PETG, ASA, ABS, PLA etc.). There are two halves and are joined using (3) screws. The screws I designed it for are from McMaster-Carr and are…

Order a print of this model

Printables

Deep Groove Ball Bearing (parametric CAD)

Deep Groove Ball Bearing The most typical design of bearing, you know it, I know it, everybody knows this. Best used when dealing with radial forces (i.e. supporting a shaft horizontally). It can also widthstand axial forces (i.e.…

Order a print of this model

Printables

Suport with grooves from Plant Pot of Dulf

Title: Support or vase with grooves This vase was designed to bring charm and beauty in the best possible way to your home. Its creative design, combined with the minimalist style, allows printing in different colors. Created to be a Dulf…

Order a print of this model

Printables

Parametric Tile with Groove

Tiles. There is never enough tiles. I am always short of some bricks when creating LEGO MOCs (My Own Creation), so I am using FreeCAD and my printer to create temporary placeholders when prototyping. The model was designed specifically…

Order a print of this model

Printables

Fancy Grooved & Twisted Pencil/Pen Holder or Flower Pot/Vase

I was playing around in Blender and came up with this pencil holder because I sorely needed one :D It's easy to print, and even easy to miniaturize if you want to see how it will come out before printing the real deal. Initially, I…

Order a print of this model

Printables

Add groove in the beams F1 & F2 parts.

The groove allows you to position the PTFE Connectors wherever you like. Also as my drybox is high up, I created the housing for the humidity captor on the facing part.

Order a print of this model

Printables

Grooved Gridfinity Tray with Separator

Can be used to store drill bits and the like.

Order a print of this model

Printables

Lego Compatible (42610.dat) Wheel Rim 8 x 11.2 with Centre Groove

This model is compatible with the lego system.

Order a print of this model

Printables

Dragon Burner V6 Groove Mount (Fixed)

Changed the geometry of the V6 groove mount so it doesn't snap in half when you press the heatsink into it.

Order a print of this model

Printables

BLTouch e3d groove mount

I made this thing because it turns out Smoothieware doesn't have support to offset the x/y position of a probe, in relation to your hotend. That limitation requires you to swap out your extruder for your probe whenever you want to…

Order a print of this model

Printables

Grooved nut Ø24 mm for inserts M3 , M4 , M5 ( the intended purpose was as a nut for the bed )

Print the model, seal the bronze insert and you're done :) The choice of material is up to you.

Order a print of this model

Printables

EX Groove Bullet Top Caddy

Desktop caddy for Pheakmods EX Groove shaft with attached Seimitsu Bullet Top and dust washer. Overall dimensions 1.85" x 3.40" x 0.875"

Order a print of this model

Printables

Groove Pico - A mini controller for Groove Coaster

This is a mini controller for Groove Coast, arcade rhythm game. It supports both Nintendo Switch and PC versions. Other than the 3D printing, there're also electronics and firmware part, please check out my GitHub page. There're other…

Order a print of this model

Printables

Emperor's New Groove NO TOUCHY Medallion

A little medallion you can use for luggage, baby strollers (don't give to baby), or anything else you want to ward people away from. Made for fun in blender, scale to 50 percent for an ideal size.

Order a print of this model

Printables

BLtouch Extended Slide Mount with Klemco groove

This is a Klemco style sliding BLtouch mount I created as part of my LGX Groove mount adapter. The model was created from scratch in Fusion 360. This allows the extended range of raising and lowering of the BLtouch on your application. It…

Order a print of this model

Printables

E3D LGX Groove Mount Adapter

E3D Groove Mount for the LGX Extruder, fits the V6 and other heat sink combinations, all heat block lengths. When the Bondtech LGX extruder came out, it was obvious that Bondtech cut a licensing agreement with SliceEngineering and left…

Order a print of this model

Printables

Lego Compatible (56902.dat) Wheel Rim 8 x 18 with Deep Centre Groove and Peghole

This model is compatible with the lego system.

Order a print of this model

Printables

T groove insert for 250x 700mm or 500mm chinese lathe (hafco,cormak,bernardo or most of vario small lathes)

Designed to help keep your lathe clean and look better. You can adjust lenght of it by scaling. Mine is printed out of PLA with 45% infill fits nicely and tight. Would like to hear your opinion about it.

Order a print of this model

Printables

Lego Compatible (13971.dat) Wheel Rim 8 x 18 with Deep Centre Groove, Deep Spokes and Peghole

This model is compatible with the lego system.

Order a print of this model

Printables

Mount for GROOVE 14 LED aluminium profile

Simple mount (no holes yet) to glue mount a Groove 14 LED strip profile. Added Fusion 360 file for easy modification to your needs. Have fun! Category: Household

Order a print of this model

Printables

Lego Compatible (3069a.dat) Tile 1 x 2 without Groove

This model is compatible with the lego system.

Order a print of this model

Printables

Lego Compatible (44302a.dat) Hinge Plate 1 x 2 Locking with Dual Finger on End Vertical with Groove on Short Side

This model is compatible with the lego system.

Order a print of this model

Printables

Lego Compatible (44302b.dat) Hinge Plate 1 x 2 Locking with Dual Finger on End Vertical without Groove on Short Side

This model is compatible with the lego system.

Order a print of this model

Printables

Lego Compatible (41740.dat) Plate 1 x 4 with Two Studs and Groove

This model is compatible with the lego system.

Order a print of this model

Printables

Custom Parts for Paw Patrol Firetruck – No Grooves, But It Works!

So, a friend sent me a part to print for his kid's Paw Patrol Firetruck, but for some reason, we just couldn’t get it to fit right. After a few failed prints, I thought, "Why not just design my own?" I fired up Fusion360 and, thankfully,…

Order a print of this model

Printables

Router guide for cutting grooves in bottom of doors

I needed to convert three doors into sliding doors for a wardrobe. This included routing a slot down the middle of the bottom of the doors for the guide, which helped the doors slide evenly. Since I had the door thickness I designed this…

Order a print of this model

Printables

RC Tank Track Wheel with groove and w/o sprocket

This is a remix for Staind's rc tank. It's a merge of oger's "Wheels with groove and colored insert" and edwardchew's "Staind RC Tank Track Wheel w/o sprocket - Critical Update" All credits go to the designers mentioned above. Head to…

Order a print of this model

Printables

V-belt pulley 8 grooves

Pulley diameter: 52mm, diameter of the hole: 5mm, overall width: 17.8 mm, distance from tooth to tooth: 1.6mm

Order a print of this model

Printables

V-belt pulley 8 grooves with hub

Pulley diameter: 28mm, diameter of the hole: 5.8mm, overall width: 32.8 mm, distance from tooth to tooth: 1.6mm, diameter square hole: 14x14mm, the depth of the hole:15mm

Order a print of this model

Printables

SG15 U-groove wheel (625 bearings)

A lot of new budget 3D-printers are using SG15 metal wheel bearings instead of POM wheels, as they can run along 6mm rods nestled inside the grooves of a 2020 extrusion, meaning printer manufacturers can retrofit designs based around POM…

Order a print of this model

Printables

Groove spiral vase / pot insert

I recommend to increase extrusion width to 0,6mm (0,4mm noozle) to have bit more stiffness. Wrinkles add the stiffness even more. Scale as you need. Original dimensions are: 92 x 92 x 80 mm Vase printed in spiral vase mode - models with…

Order a print of this model

Printables

2KG Spoolholder with radial deep groove ball bearing for Prusa MK4

Unter Dateien finden Sie auch Druckdateien in denen der Halter links + rechts und 2 Sternmuttern gleichzeitige gedruckt werden. Dies spart etwas Zeit. Für die Montage des Halters werden noch die folgenden Kaufteile benötigt: 2…

Order a print of this model

Printables

Drill guide for 2020 nut 6 (6mm groove) V-Slots, 3-6mm holes

Drill guide for 2020 nut 6 (6mm groove) V-Slots A simple fixture for drilling straight and in the center of the groove. Useful for drilling through the aluminum extrusion when you would for example want to bolt two extrusions together.…

Order a print of this model

Printables

Magnetic planter - Grooved

I recommend printing the planter upside down, using the variable layer height option and enabling supports for the best quality. No brim needed. It uses three 12x3mm magnets that are simply press fitted. I've used N45 magnets and the…

Order a print of this model

Printables

Fischertechnik washer for loose grooves

Changelog: 2020-01-31: Added variants with only one peg. The fischertechnik groove and peg connections are sometimes too loose, due to inaccuracies in 3D-printed parts or wear of the original parts. This washer will result in a tighter…

Order a print of this model

Printables

fischertechnik building block 15 with six grooves (Baustein 15 mit sechs Nuten)

A more versatile alternative to the classic fischertechnik building block 15/Baustein 15 . This idea has been around for some while and others have realized it before . However there's no version on thingiverse yet, so here's my version.…

Order a print of this model

Printables

Canyon GEAR GROOVE Garmin Mount

The GEAR GROOVE Garmin Mounts are sold out on the website, so I added the lock made by @Trunda_1437739 to a GEAR GROOVE model. Included are 2 .3mf files; one in normal orientation with ironing on top level, but the upside down orientation…

Order a print of this model

Printables

Shims - with groove for screw

I inherited a rolling table for the garage from my dad, but the top was not flat. Designed these to cradle the screws under the top so I could true up the top. Fits nicely on top of standard 2x lumber (1.5"). Just change the Z height to…

Order a print of this model

Printables

RPG Book Box Dice Tower and Box- Chamfered Groove

A remix of the for BalladBlack's RPG Book Box ( https://www.thingiverse.com/thing:4968409 ). The only change that lids and the tracks for the dice boxes and tower. They are now chamfered so they can printed without supports. It may have…

Order a print of this model

Printables

Xiaomi / Mi sensor battery door "groove"

Alot of my battey doors have got worn during the years of changing batteries, the plastic is soft so a coin can sometimes harm it. This is a simple fix to get a “proper” groove to slide a coin in and be able to open the door. I have…

Order a print of this model

Printables

Hexagon candle holder with grooved texture.

Candle holder with a beautiful design and hexagonal shape, designed so that you can print it in various colors or materials and choose between 3 different heights. You can also combine other models that you will find in my collection of…

Order a print of this model

Printables

Benchdog V-Groove adapter - 20 mm European

An adapter for a European workmate style workbench to easier hold round objects. Make from TPU for a non-marring grip.

Order a print of this model

Printables

Pole Mount Tab for Horizontal Extrusion Groove ("Prusa XL Soft Filament Holder" Modification)

-The original pole mount appears designed for the vertical bars of the extrusion frame on the XL side panels. To be able to use the mounts, the filament spools for tool #4 and #5 must be removed to accommodate the location of the dowels.…

Order a print of this model

Printables

riser lid for K1 Max. Here you only fit 3mm thick acrylic sheets in the grooves.

new model on riser lid for K1 Max. Here you only fit 3mm thick acrylic sheets in the grooves. The dimensions of the acrylic sheets are 305x39mm

Order a print of this model

Printables

Canyon gear groove Aero Extension Computer Mount

Tested and approved, fits perfectly, recommended with carbon filament for better vibration resistance. You need to screw in your Garmin adapter (to be retrieved from a Garmin mount supplied with your Edge).

Order a print of this model

Printables

Lego Compatible (3070a.dat) Tile 1 x 1 without Groove

This model is compatible with the lego system.

Order a print of this model

Printables

[OETS] Trapezoidal Spindle standard parts TR8x8 4 grooves

Spindles, nuts threaded inserts fitting TR8x8 4 grooved systems. Primarily intended for use in the further modeling process.

Order a print of this model

Printables

SPIRAGROOVE

🌿 SPIRAGROOVE – Nature's Spiral in Design 🌿 Unveil the dynamic allure of the Spiragroove planter! Its design features bold, spiral grooves that mimic the rhythmic patterns found in nature. This planter not only adds a touch of modern…

Order a print of this model

Printables

Groove Counterweight

This is one of my favorite counterweights for 5A play. Aim for 10g weight. Prints well in PLA and TPU. If you want squishier TPU, print concentric infill. Counterweight supports quick string removal with the channel or more secured…

Order a print of this model

Printables

Grooved Desk Organizer

This is just a simple desk organizer with a midcentury modern feel. There is an optional foot that can be printed in TPU to prevent the organizer from scratching your desk. You can secure it with four M3 countersunk screws or just glue it…

Order a print of this model

Printables

Collision free Prusa Standalone drybox (with Tape groove)

Added some clearance needed at the hinge so it doesn't brake when assembling.. Also added some room for a double sided tape to attach the boxes to my printer (I had some 3M VHB tape lying around..). Tape groove is 19,5x119,95mm with a…

Order a print of this model

Printables

Clamp with 25x26 groove

Added a 25x26mm groove 30mm from outer edge.

Order a print of this model

Printables

Tamiya - Tire for RC car rim - model 01 V-groove

Order a print of this model

Printables

Lego Compatible (44301a.dat) Hinge Plate 1 x 2 Locking with Groove with Single Finger on End Vertical

This model is compatible with the lego system.

Order a print of this model

Printables

Vise Pad with grooves - to fit Quick-Adjust Half-Nut Vise

Order a print of this model

Printables

Router Guides adjustable grooves for Bosch router

Material use was black PETG. Strength setting Orca Slicer: Top shell layers: 4 layers Top/Bottom solid infill/wallover lap 25% Support setting Orca Slicer: Type: Tree (auto) Style: Organic Top Z distance/Bottom Z distance 0.28 mm Requires…

Order a print of this model

Printables

Smiley Ram Base with better printing -123 o-ring grooves

Remixed Ram Base with better -123 o-ring groove geometry so it prints nicer vertically. Changelog: 4-20-2025: Added STEP and F3D source files for CAD users.

Order a print of this model

Printables

Lined/Grooved Picture Frame

5x7 Photo frame with back plate. I added a 5x7 clear acrylic panel to protect the photo that I purchased from Amazon ( https://www.amazon.com/dp/B07ZVNJ8FK?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 ). Printed grooved face down with no…

Order a print of this model

Printables

X axis motor and idler mounts without linear rail groove

Slightly modified to remove the linear rail groove. When printing these pieces in high temperature plastics, it was impossible to scale the part to match the rail grooves. Also provides a little more alignment room when assembling.

Order a print of this model

Printables

Replaceable grooved tips for Bernstein tweezers

I needed some grooved tweezers to better hold wires or pins when soldering, because even the serrations in some tweezers would allow the wire to rotate. I found the 5-064 style of tweezers from Bernstein, but since I have a 5-434 I…

Order a print of this model

Printables

Prusa MINI fill for aluminium profile groove

R2_F is for upgraded base with a brace ↓ and R2_F_V2 is for base from manufacture. https://www.prusaprinters.org/prints/51415-prusa-mini-z-axis-brace R3 is for stabilised Z bottom ↓ and R3_V2 is for base from manufacture.…

Order a print of this model

Printables

glue adhesive spatula with grooves, smal

Spatula for even distribution of adhesive - smaler version for corner Groove-wide = 1 mm

Order a print of this model

Printables

glue adhesive spatula with grooves

Spatula for even distribution of adhesive Wide = 60 mm Groove-wide = 1 mm

Order a print of this model

Printables

Pen with grooved grip (BIC)

filement_md - pen with grooved grip - bed supports and brim optymized in the file. File with central support blocker

Order a print of this model

Printables

Pen with Grooved Grip (BIC) 2

Pen with Grooved Grip (BIC) bed supports and brim settings added im the file added support blocker to the file

Order a print of this model

Printables

Slim grooved PEN (BIC)

Slim grooved PEN (BIC) print slow File with supports setting and support blockers.

Order a print of this model

Printables

Easter egg with groove for secondary filament

I printed the egg in PLA with 0.1 mm layer height and organic supports, on build plate only, and up to 30° overhang. I removed the supports, cleaned the print, and inserted a TPU filament in the groove (about 64 cm in length).

Order a print of this model

Printables

Prusa XL_2kg & 5kg Grooved ball bearings spool holder

To mount you will need: Cylindrical pins: 2x Ø6 x ~70 1x Ø12 x 160 (I used Cylindrical bolt) Deep groove ball bearings 2 x m6 T-slot spring nuts (T-Nuts should also work) 2 x m6 16mm machine screws (and the driver of course) I printed my…

Order a print of this model

Printables

3030 Extrusion Mounting Base (Grooved)

I created this 3030 extrusion (grooved) mounting insert to help with creating mounts.

Order a print of this model

Printables

Groovers for victorinox 91mm

Victorinox Knife Scales top & bottom

Order a print of this model

Printables

AFG angled foregrip m-lok + rear groove

Quick remix of EszOzwierz's great AFG remix, added a groove on rear to allow easier access to screw hole.

Order a print of this model

Printables

Vase « Grooved Pear »

Order a print of this model

Printables

Case for Ableton Move Groovebox

Multi-material printing is optional and provides an attractive front with space to imbed the owner's name. I printed with PLA+ and used a brim to keep the corners fully flat. Note: This model requires a 1/8" stainless steel rod for the…

Order a print of this model

Printables

Groove - The Headphone Stand

Modern designed headphone, headset holder. Easy to print without supports Printed with PETG HF black Tolerances are minimal, so use a little more force to assemble. Gluing is therefore not necessary.

Order a print of this model

Printables

Wall-Mounted Ski Rack with Gravity-Fit V-Groove

This is a wall-mounted ski rack designed for convenient and secure vertical storage of your skis. The holder features a V-shaped groove, carefully designed to accommodate skis using the force of gravity for a stable fit. The top opening…

Order a print of this model

Printables

GoPro Adapter for Canyon GEAR GROOVE Computer Mount

To be used with Canyon GEAR GROOVE Computer Mount https://www.canyon.com/en-ca/gear/accessories/bike-tech/cockpit-and-handlebar-mounts/canyon-gear-groove-computer-mount/10012928.html Insert the Mount from the bottom and Twist to lock it…

Order a print of this model

Printables

Grooved pencil holder

This pencil holder features a distinctive grooved design that enhances the aesthetic appeal of your home or office environment. It has been expertly modeled using Onshape, ensuring both functionality and visual appeal. This pencil holder…

Order a print of this model

Printables

Deeper pulley grooves and support stepper motor shaft

Modified the wheels to have deeper grooves so the string won't fall off when setting it up and during operation.

Order a print of this model

Printables

Calipers groove and thread measuring jaw extension

Adapters that snap on regular 1/8" thick caliper jaws to allow measurement of thin features. Groove and thread depth measuments while machining. Works better with digital calipers due to their zero function, install, calibrate the new…

Order a print of this model

Printables

YARWM: o-ring groove on irregular lip

From reddit question: https://www.reddit.com/r/Fusion360/comments/1ll0r9e/how_would_you_add_a_seal_grove_to_the_outer_part/

Order a print of this model

Printables

Parametric Deep Groove Ball Bearing

This is not a file to just download and print. It requires you to load the model into Fusion and find the parameters that works with your needs and then export a print-file from there. This is also not a completely 3D-printed bearing…

Order a print of this model

Printables

Vase - Spiral Groove

Hello Everyone, I modeled this vase in Fusion360. I designed it for a friend to give as a gift. It has a spiral design and the walls are 0.080" thick. Overall height is 8.0" tall and a max outer diameter of about 4.0" I hope all enjoy…

Order a print of this model

Printables

Magsafe Charging Stand. "Groovemade inspired"

A Magsafe charging stand that iterates on: https://www.printables.com/model/619648-iphone-magsafe-stand-grovemade-inspired and https://www.printables.com/model/1225933-modified-magsafe-stand-grovemade-inspired Print both pieces, (supports…

Order a print of this model

Printables

Lego Compatible (59900.dat) Cone 1 x 1 [Top Groove]

This model is compatible with the lego system.

Order a print of this model

Printables

"Graveyard Groove" - Skeleton Dance Halloween Hueforge

🎩 Graveyard Groove - Skeleton Dance Halloween Hueforge 💀 "Graveyard Groove" captures a spirited skeleton mid-dance beneath a dramatic spotlight, dressed to impress in a top hat and tux. Set on a ghostly stage with scattered bones and…

Order a print of this model