Prusa MK3/2(s) Copperhead Groovemount Hotend Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
June 1, 2020 - This is a first pass at my Slice Engineering's Copperhead groove mount hot end adapter.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 111
- Makes
- 0
- Views
- 1,669
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
June 1, 2020 - This is a first pass at my Slice Engineering's Copperhead groove mount hot end adapter. There may/will be some changes as I test it out but I just wanted to get it out there for other early adopters.
Print instructions
Notes an installing:
- Assemble the Copperhead as shown in the photograph and diagram
- Insert a PTFE tube all the way into the Copperhead
- Snap the Copperhead into the Extruder Body to mark PTFE cut point
- Remove PTFE to get straight cut and bevel inside of PTFE top
- Use Prusa stock parts for fan mount, nozzle shroud and sensor assembly
Notes on printing:
- Sorry for orientation. Will fix. Print Motor Mount and cover 180 rotated
- Extruder Cover has an indent with Copperhead logo
- Also provided is the logo if you have MMU capabilities
- Standard print specs - PETG - 15% fill - .20mm Quality
Note on maintenance:
There is a small hole inside the baffle which gives you access to the heat break tension screw. This will allow you to remove (drop down) the heat break/heat block assembly without taking the extruder apart. Just remove the cooling fan to access it.
More to come....